Power backup and patient isolation in a 2U-high, 19-inch rack solution
The PowerBridge™ AC uninterruptible power solution is now available with 120V and 220V AC output power to support a variety of applications.
New 30W Switch-Mode Power Supply
Astrodyne TDI's new ASM30 series of convection cooled power supplies deliver up to 30 watts of regulated DC output for a variety of applications including healthcare, industrial equipment, and commercial electronics.
HermesFlex AC/DC Programmable power supply
medical-grade programable power supply
The Role of EMI Filters in Industrial Automation
As industrial automation becomes more digitized, the susceptibility of equipment to electromagnetic interference (EMI) increases. Filtering and/or shielding these devices against EMI is vital to ensure uninterrupted operation and intended output. This is especially critical because due to interference, controls can malfunction, resulting in faulty output. This can cause serious accidents and/or line-down conditions resulting in loss of productivity.
EMI/EMC filter for EV charging stations
New electrifying EMI/EMC filter solution for ev-chargers.
Protecting Computing Applications from Common ESD and EFT
ProTek Devices’ PLR0621 TVS array is suited for circuit protection in computing applications.
2000W CRPS Module for Datacenter applications
FSP2000-20HM is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 2000 Watts,
HermesFlex™, a 2.2kW medical-grade, programmable power supply
Compliant to industry standard IEC60601-1 with 2 MOPP (means of patient protection) and BF Leakage Current as well as UL62368-1, HermesFlex™ represents the latest evolution of Astrodyne TDI’s industry-leading medical grade power solutions. HermesFlex™ provides two isolation barriers that are required to ensure that the applied part is isolated from the ground eliminating the need for bulky isolation transformers in devices that...
Slim, Lightweight & High-Performance EMI/EMC Solution
The new DIN-rail mount EMI/EMC filter solution by Astrodyne TDI was developed with space, weight, and efficiency in mind. The design features an ultra-slim plastic enclosure with a user-friendly spring cage connection to simplify installation and minimize space requirements. The 089 Series is available with a metal oxide varistor (MOV) to protect against voltage spikes, while the 089H Series can...
Alcom Electronics heeft een nieuwe lijnkaart
Alcom Electronics heeft een ververste lijnkaart! Met trots vertegenwoordigen we de fabrikanten op onze lijnkaart met wie we een hecht en langdurig partnerschap hebben. Met onze door de fabrikant gecertificeerde verkopers en technische applicatie engineers bieden wij u een betrouwbare basis voor uw keuze voor Alcom. Alcom Electronics zet zich in om haar klanten te voorzien van geavanceerde componenten, modules,...
High energy multilayer varistor
Eaton’s Multilayer Varistors provide highly reliable protection for electronics against electrostatic discharge (ESD) and higher power transients. They are ideal for the protection of I/O interfaces as well as components and circuits sensitive to ESD transients occurring on power supplies, control and signal lines. Chip MLVs are offered from working voltages of 5.5 Vdc up to 200 Vdc and capacitances...
Diode for CAN Bus and Automotive Circuit Protection
Protek introduced a new circuit protection diode to shield CAN Bus and other automotive subsystem designs from electrostatic discharge and other electrical fast transient damage. The ESD protection level is rated at > 25 kilovolts. The PESD2402 is designed to protect two signal data lines from impairment arising from ESD and other applied transients. The diode operates at 24V with...
Why to use an EMI/RFI Filter and off-the-shelf versus custom EMI filters
In the broadest terms, EMI and RFI amount to interferences of an electrical or magnetic nature that can degrade how well a piece of electronic equipment performs or the quality of the signal it receives — which is responsible for its nickname “noise.” Why to use an EMI/RFI FilterOff-the-shelf versus custom EMI filters Datasheet Find out more about Astrodyne products
Eliminate interference in electrical systems and equipment with optimal EMC solutions
Schurter and Alcom will be pleased to work with you to find the optimal EMC solution for your specific application. On your behalf, we conduct EMC tests, provide interference suppression for your equipment, fabricate specific product samples for you and support your product life cycle from development all the way to series production. In addition to customer-specific products, you can...
Circuit Protection Catalog including Application Solutions
Alcom offers a 66page short-form catalog, designed for quick and easy access to all of our parts. Includes electrical characteristics, circuit diagram of each product series and selection chart per application Select the right products using the matrix covering Communication, Automotive, Industrial & Military/Aerospace Applications Find out more about Protek Devices
RP359 3-Phase Delta Compact EMI Filters
RP359 3-Phase Delta Compact EMI Filters are multi-stage power line filters available from 150A to 2500A current rating. These 3-phase high current EMI filters offer 50/60Hz operating frequency and 520VAC (maximum) operating voltage. The RP359 3-phase Delta compact multi-stage high current EMI power line filters are RoHS compliant. These RP359 EMI filters are suitable for industrial and commercial environments. 50/60Hz...
Optimize your PCB for EMI and EMC testing
Every printed circuit board (PCB) should be able to operate without disruption due to interference from other devices and without causing interference. To accomplish this, PCBs need to have strong electromagnetic compatibility (EMC) built-in from the ground up. EMC is what keeps our devices from constantly interfering with each other. The high amount of wireless devices in use today —...
AEC-Q101 TVS Arrays for Communications Interfaces
AEC-Q101-qualified TVS arrays for circuit protection in automotive, aerospace, intelligent control systems, consumer electronics, and telecommunications. The new PAM37SDxxAL/CAL series is available in multiple voltages.The TVS components are compatible with IEC standards 61000-4-2 (ESD): air 15kV, contact 8kV, 61000-4-4 (EFT): 40A, 5/50ns, and with 61000-4-5 (surge): 8/20 microsecond waveform. They also deliver 400W peak pulse power per line (typical =...
RP692 High Voltage / Current DC Filters
High Voltage / Current DC Filters are power line filters available from 25A to 2500A current ratings. The RP692 high voltage/current DC chassis mount filters provide 1200VDC (maximum) operating voltage. These power line filters are RoHS compliant and suitable for inverter applications. 1200VDC maximum operating voltage4700VDC Hipot rating50/50O typical insertion loss dB Datasheet Find out more about Astrodyne products
High Power Density for the Latest 10W DC-DC Converter
MINMAX is proud to announce the new MDW10 series of 10W Isolated/Regulated DC-DC Converters with wide input ranges in the compact 16 pin DIP package measuring only 0.94×0.54×0.31”, offering a very high power density up to 65W/in3. This level of integration offers system designers the opportunity to reduce overall PCB layout area or add more features into existing PCB profiles....
ESD protection for In-Vehicle Networks
ProTek introduced two automotive circuit protection devices that are AEC-Q101 qualified to guard against electrostatic discharge and electrical fast transients in critical automotive systems.The PAM1IVN27 and PAM2IVN24 devices are ideal for CANBus, LINBus, FlexRay, and SENT in-vehicle sub-systems. Both new devices are also compatible with IEC standards 61000-4-2 (ESD): air ±30kV, contact ±30kV; with 61000-4-4 (EFT); and with 61000-4-5 (surge):...
RP415 3-Phase WYE Single Stage Filters
RP415 3-Phase WYE Single Stage Filters are power line filters available in 8A to 160A current ratings. These RP415 power line filters are compact 3-phase WYE single stage to 160A chassis mount filters. The RP415 filters offer 480VAC (maximum) operating voltage, 50/60Hz operating frequency, and are RoHS compliant. Typical applications include 3-phase industrial drives, inverters, controllers, frequency converters, industrial power...
Chassis & DIN-Rail Mounting – MKWI10C Series
The MINMAX MKWI10C series is a new range of high performance DC-DC converters featuring a wide 4:1 input range in a chassis-mount package with terminal strip connections and optional DIN-Rail mounting offer system designers the opportunity to eliminate the power board request in the fieldapplication.Further features including high efficiency 86%; wide operating temp. range by -40℃ to +92.5℃ ; I/O...
Double ESD Circuit Protection Diode for Networking Devices
The PESD3V3 is a double ESD protection diode in a SOT-23 package configuration. The device is designed to protect communications application from the effects of electrostatic discharge (ESD) and electrical fast transients (EFT). Features:Compatible with IEC 61000-4-2 (ESD): Air ±30kV, Contact ±30kVCompatible with IEC 61000-4-4 (EFT)Compatible with IEC 61000-4-5 (Surge): 25A400 Watts Peak Pulse Power per Line(tp = 8/20µs)Protects Two...
RP210 Compact Dual Stage Filters
Compact Dual Stage Filters are single phase power line filters available in 3A, 6A, and 16A current ratings. These RP210 power line filters are a dual stage to 16A chassis mount filters. The RP210 filters offer 120/250VAC (maximum) operating voltage and 50/60Hz operating frequency, and are RoHS compliant. These RP210 power line filters are ideal for general purpose applications. Single...
Single-Phase EMI Filter for 277Vac/400Vdc Applications
The FMAB HV series of EMI filters for 1-phase systems. The new filter is suitable for applications requiring ac voltages up to 277V, such as 1-phase of the 3-phase 480Vac/277Vac wye system, typically used for lighting applications in North America. It is also rated for 400Vdc, a power infrastructure increasingly common in data centers and related equipment according to IEC...
RP100 Compact Single Stage Filters – Medical Grade To 10 A Chassis Mount Filter
Compact Single Stage Filters are single phase power line filters available in 3A, 6A, and 10A current ratings. The RP100 filters offer 120/250VAC (maximum) operating voltage and 50/60Hz operating frequency. The power line filters are medical grade and RoHS compliant. These RP100 power line filters are ideal for medical and general purpose applications. Single phase power line filtersMedical grade filters...
AEC-Qualified ESD Diode for Automotive Circuit Protection
New circuit protection diode suited for automotive applications, such as Controller Area Network (CAN) bus lines. The new PAM3CAN diode is qualified by the Automotive Electronics Council (AEC). The PAM3CAN is designed to protect two automotive CAN bus lines from the damaging effects of electrostatic discharge (ESD) and other electrical fast transients (EFT). In addition to being AEC-qualified, the new...
Compact 3-Phase EMC Filter for High Electro-Magnetic Loads
FMAD NEO is a single-stage EMC filter series for 3-phase systems with a neutral line. Especially compact with high performance, the new filter series is suited for use in today’s more portable industrial machines. A wide temperature range further extends its capabilities for use in demanding climatic applications.The FMAD NEO is especially suited for applications with high electro-magnetic loads, such...
Looking for Schaffner cost-effective direct replacements
Use our cross reference chart to quickly find your part. Contact us to cross offer manufacturers such as Tyco and Corcom. Datasheet Find out more about Astrodyne products
New Surge Protector Offers Super Ultra-Low Capacitance
New ultra-low-capacitance surge protection component for circuit protection in applications such as automotive infotainment systems, industrial cameras, Thunderbolt and more. The very low capacitance for the new PTB05-ULC is 0.15pF max (I/O to GND).The PTB05-ULC is designed to protect high speed data lines – up to eight – from electrostatic discharges (ESD) and electrical over-stress (EOS). It is compatible with...
Common Mode Chokes for 4 line Applications mount on PCB
Schurter expands its successful range of current-compensated chokes with a series for 4-wire high-current applications on printed circuit boards. The new DKIH-4 series is available for three phase applications with neutral line at rated currents from 10 A to 40 A. Due to the open design, the chokes are particularly compact and light.Like most electronic assemblies, the power section is...
Steering Diode / TVS Arrays Deliver Electrical ESD Circuit Protection
New steering diode / transient voltage suppressor arrays for electrical circuit protection in various computing interfaces, such as Gigabit Ethernet, HDMI and USB. The two new parts, in conjunction with passive components integrated into a TVS / filter network, can also be used for electromagnetic / radio frequency interference protection. The new components are the PLR0504PLCN, with a 5.0 volt...
Single-Phase EMI Filters
Single-phase EMI Filters suppress the electrical noise of a wide range of appliances and equipment. At Astrodyne TDI, we offer off-the-shelf Single-Phase Filters available from 1A to 150A, as well as custom current ratings of up to 2500A. Many industries use Single-Phase EMI Filters in their products. Telecommunication, Commercial, Industrial, Medical and Fitness Equipment all make use of Single-Phase EMI...
Power entry module with double-stage filter
Today’s electronic equipment is designed to deliver high performance in a compact size. Often this causes problems affecting the equipment itself or other nearby devices due to the inherent electro-magnetic interferences being generated in and between the different systems. To meet these EMC challenges, high performance power entry modules must also keep pace, and such is the case with the...
TVS Array Series for Smartphone Circuit Protection
New series of ultra-low capacitance (0.6pF typical) transient voltage suppressor arrays for overvoltage circuit protection in smartphones and other portable electronics. The new series is also suited for Ethernet, USB interface and wireless systems.ProTek Devices’ GBLCxxCIDFN series of TVS arrays are available in a bidirectional configuration. They are rated at 250 watts peak pulse power per line for an 8/20...
THREE-PHASE EMI FILTERS
A Three-Phase EMI Filter reduces Electromagnetic Interference and helps you maintain compliance with emission standards. At Astrodyne TDI, you’ll find a range of EMI Filters available for both Delta and WYE configurations.Choose from a range of voltages — including 480VAC, 520VAC and 600VAC — and current ratings up to 2500A. We offer Single, Dual and Multi-Stage designs, as well as...
Evalution Board – The ideal EMC filter in just 6 steps
The causes of EMC interference can be of various kinds. Therefore, standard filters are not always the simplest and best solution. SCHURTER now offers a so-called “Evaluation Board” with which an almost ideal filter for the specific incident can be built within a short time in an iterative process.Every developer of an electrical or electronic device is faced with the...