Cinergia has launched a new model that combines all previous models in one unit. So you have a Grid emulator, a regenerative AC load, a DC power supply, a bipolar power supply, a regenerative DC load, a battery simulator, a battery tester, a PV emulator and a high power amplifier (hardware in the loop applications). an instrument. And with specifications per functionality that you only see in the most advanced models of the competition.
For example, with the grid emulator you can vary the amplitude per phase, but you can also create different harmonic distortion. And there is also the option of a freely programmable frequency up to 2500Hz. There are standard test protocols for, among others, the IEC61000 standards and Semi F47. You can also use the unit as a single channel or three channel amplifier. Because the unit is regenerative, it can also perfectly test solar and wind inverters. But also bidirectional chargers for electric cars, buses and trucks.
And then you can use the same unit to test the battery capacity, for example, or use the unit as a battery emulator to test the underlying electronics.
The capacities of these units range from 15kVA to 200kVA per unit. In the unique plus2 platform you can also connect multiple units in parallel, making capacities up to >2MW possible. The hardware is supported with an extensive software package for the various functions. Direct control is also possible via Mobus commands or from NI Labview.
In short, a particularly versatile power supply / load for all your high power applications.
For detailed specifications of this product, please refer to the data sheet.
Nederlands