Winstar WF70MTABHLRN0 is a 7 inch IPS M Series TFT-LCD display, made of resolution 1024×600 pixels. The M Series TFT is an “all in one system” which supports two kinds of user interfaces; the UART and SPI interface. WF70MTABHLRN0 module is featured with IPS panel which is having the advantage of wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical), contrast ratio 800:1 (typical value), high brightness 600 nits (typical value), anti-glare surface panel, aspect Ratio 16:9. The power voltage of LCM is 5V (1.5A at least). It can be operating at temperatures from -10℃ to +70℃ and storage temperatures from -30℃ to +80℃. This 7″ IPS M series have Resistive Touch Panel and Projected Capacitive Touch Panel for options.

WF70MTABHLRN0 module is built-in with microcontroller STM32F429 (CPU Frequency 180MHZ) on control board. Winstar designed an UI (user interface). By using Winstar TFT UI editing program and firmware, users can accelerate the project development. More detailed information of this IPS 7″ M Series TFT series, please find in the following content.

WF70MTABHLRN0

Dimension

Size

7 inch

Dot Matrix

1024 x RGB x 600 (TFT)

Module dimension

170.3(W) x 103.8(H) x 20.15(D) mm

Active area

154.2144 x 85.92 mm

Dot pitch

0.1506 x 0.1432 mm

LCD type

TFT, Normally Black, Transmissive

Viewing Angle

85/85/85/85

Aspect Ratio

16:9

Backlight Type

LED, Normally White

Interface

Uart 19200 Baud rate/SPI

Touch Panel

PCAP /RTP options

Surface

Anti-Glare

Operating mode

Slave mode

Flash Memory Size

32M bits (4M Byte)

SD card format

FAT, exFAT

Control IC 

STM32F429 

Power 

5V, 1.5A(at least) 

 

For more information, please contact Nijkerk Electronics.

FHI, federatie van technologiebranches
en_GBEnglish (UK)