H&H, manufacturer of an impressive line of electronic loads and four-quadrant power supplies, has developed the new SCL series especially for testing high-current DUTs such as fuel cells and battery cells. This electronic Single Cell load can load a connected voltage source up to 1,200 A at a minimum input voltage of only 600 mV (standard models) or even from 0 V (SCL ZV).
This series is available with a voltage range of 0-12V and 0-40V and suitable for currents of 400A, 800A and 1,200A. For even higher currents, multiple loads can be connected in parallel in a master – slave configuration. The different models are housed in a compact 19″ housing of only 2 U high.
Of course, the SCL series has the standard functions of CC, CV, CR, CP mode. And the combined functions such as CC+CV, CR+CC+CV, CP+CC+CV, CV+CC. In addition, these models have a number of functions specifically associated with high current DUTs. Including determining the internal DC resistance of the connected DUT in accordance with, for example, DIN EN 61951, DIN EN 61960. This SCL series is also equipped with a discharge function, a modulator function in the frequency range of 0.1 Hz ... 10 kHz and a data log function with a time stamp.
Almost all common interfaces are available as standard for remote control. RS-232, USB, LAN, CAN and Analog. GPIB is optional.
For more information about the Single Cell Load, please refer to the data sheet, or contact one of our consultants.
Nederlands