LI-830/850 series, analyzers for the flexible and accurate measurement of CO2 and H2O

For accurate and stable CO2 measurements with a large measuring range and fast response time, you must have a LI-COR LI-850/830. Because the LI-850/830 has an uncertainty of the measured value and not of the full scale, you can measure very low and high concentrations with the same analyzer.

This analyzer has been used in climate and botanical research for decades. And has already been expanded with the option to add a pump and display.

The analyzers are, as expected from LI-COR, accurate and stable. This is evident from the specifications that LI-COR always specifies, meaning that the analyzer always performs better than indicated.
Over the entire measuring range of 0-20,000 ppm, the LI-830 is more accurate than 3% and the LI-850 is even more accurate than 1.5% of the reading. In addition, the analyzer has a very low drift and noise that is below 1 ppm. Ideal for precision measurements and monitoring.

The LI-830/850 analyzers are flexible and adaptable to your application:
This makes it easy to configure with a PC via a USB connection. This allows you to set the analog outputs accordingly. In addition, digital communication is also possible via XML.
You can now optionally order a display and an internal pump with the analyzers. The internal pump guarantees a constant air flow through the measuring chamber for a reliable measurement.
You can read the current measured values directly on the display.

The analyzers can be used for research purposes, monitoring climatic conditions or as a calibration reference for, for example, CO2 measuring sensors.

If you need a high-quality CO2 analyzer for your application, please contact CaTeC. We will then come up with a suitable solution without any obligation.