SLK 7: It's a kind of magic!

Electronic elements are getting smaller and smaller. For example, the most recent LED drivers may only be 11mm high. This reduced height helps lighting designers to design fixtures that are extremely flat. Yet there are only a limited number of component manufacturers that offer flat solutions for the ideal power supply.

But help is on the way: the SLK 7 connector with a height of 11mm fits perfectly in these extremely flat fixtures and can be used for wiring up to 2.5 mm². The five poles provide space for both the power supply and the light control.

All benefits at a glance

• Extremely flat – only 11 mm high and 27 mm wide
• Five poles for power supply and light control
• Various fixing and earthing options

Superpowers

The SLK 7 connector enables daisy-chain wiring on the installation side. The upper and lower terminals of the double decker component are interconnected. Because there are two terminals per pole for internal wiring, two drivers can be connected. Flexible wiring can be used for the upper terminals of the SLK 7. They can also be easily released by activating the release levers.

Plenty of choice

You can choose between screw and PIEC (push-in-earth contact) earthing. The fixing pins of the SLK 7 connector fit into the standard cutouts, just like its predecessors: the SLK 3 and SLK 5 connectors.

This is where the magic begins!

For aluminum profiles (ALP), SLK 7 uses a so-called fir-tree fixation system. All you have to do is push the small “fir-tree” into the profile and move the connector to the desired position (or push it out horizontally and release it). You don't need any tools. It's super easy! An alternative is the version with adhesive tape on both sides. This solution saves you a lot of space!

For more information: info@luxendi.com