The Neware The CT/CE-4000 series offers a complete line of models for testing battery cells. These can be button cells, pouch cells, cylindrical cells, or block cells. Each model in the CT/CE-4000 series has 4 current ranges, allowing you to measure with extreme accuracy, even in the lower current ranges.
For each channel, you can program a charge/discharge cycle of up to 254 independent values. The measured values can be stored in internal memory.
Programming these cycles is extremely simple with the included BTS software. In the software, you can of course also configure all protection settings, such as maximum charging voltage, maximum discharging voltage, maximum charging current, maximum discharging current, maximum capacity, and optionally maximum temperature.
Available models in the CT/CE‑4000 series
- CT‑4008Q‑5V/100mA
- CT‑4008Q‑5V/6A
- CT‑4008Q‑5V/12A
- CE‑4008Q‑5V/15A
- CE‑4008Q‑5V/20A
- CE‑4008Q‑5V/30A
- CE-4000-20V/10A
Need higher speed or higher current?
If you require a higher sample rate and current response time for your application, take a look at the CT-9000 series from Neware. It is available in 2 channels and multiples of 8 channels.
If you require a higher current, take a look at the CT/CE-5000 series, with the CE-5012-5V600A as the top model, or the Pro version in the CE-6000 series. CE-6006-Pro-6V1200A with a maximum current of 1200A and a minimum pulse width of 10 msec.
For the correct configuration of your test setup, we advise you to contact us. The technical consultants at TTMS can best support you using a comprehensive questionnaire, ensuring that you receive the most suitable configuration for your application.
Related products
- Test fixtures
- Climate chambers
- CT/CE-5000
- CT/CE-6000
- CT/CE-9000
- BMS test instrumentation (CE-6'S-BMS-24S300A)