A broken cable chain You measure it, and then you have two numbers: the interior height and the interior width. You search further based on that measurement. Until now, you had to browse through catalogs for that. On wisman-techniek.nl, it now says per internal dimension which cable chains belong to them, with bending radius, pitch, and travel per type.

Step 1: start with the thickest cable

The internal height of the cable chain must be at least 10 percent greater than the diameter of your thickest cable or hose. A 20 mm cable therefore requires an internal height of at least 22 mm. Per interior height you can see which types are available, for example at 25 mm, 30 mm, 40 mm and 50 mm.

Step 2: determine the inside width

The internal width is determined by the number of cables side by side and the dividers needed to keep them separated. Some types have fixed widths, while with others the width is adjustable. Examples are 28 × 50 mm and 38 × 75 mm. With the fill rate calculation tool Check if all cables and hoses fit.

Step 3: check the bending radius

The bending radius of the cable chain must be at least as large as the smallest permissible bending radius of your cables. The page lists which radii are available per type for each internal dimension. If you are unsure about the cables, you can check this using the bending radius calculation tool.

Step 4: determine the length

The length of the track is determined by the roadway and the bending radius. In the calculation tool for cable chain length Enter both and see how many meters you need.

Replace? Measure the old cable chain

When replacing, the existing chain is the starting point. Each measurement page explains how to measure the current cable chain, and in the replacement guide you will find the type that fits. If you want to compare types side by side, you can do so in the overview. comparing cable chains.

Select by application

Not every cable chain fits every environment. A chain in a laser cutting machine asks something different than a caterpillar on a container crane or overhead crane. Therefore, the stand cable chains also by application in a row.

Order directly or have it calculated

You order standard types by the meter in the Online store. For long travel distances, steel cable chains, or a complete system with cables, duct, and end fixings, Wisman Techniek calculates the configuration in the cable chain configurator.

Wisman Techniek is the exclusive Dutch dealer of Tsubaki Kabelschlepp, the inventor of the cable chain, and has been supplying since 1975. cable chains from our own stock in Ruurlo. Questions: +31 88 002 3500 or verkoop@wisman-techniek.nl.

FHI, Federatie van technologiebranches