A robot bends, twists, and twists its cable bundle with every movement. Without guidance, the bundle chafes against the arm, gets caught in the cell, and cables break at the wrist. A cable break brings the entire cell to a standstill. Wisman Techniek has therefore set up a robotics division that dress pack delivers as a total package: engineering, parts, and assembly from a single source.

What is a dress pack?

A dress pack protects and guides everything going to a robot's tooling: welding current, air, cooling water, signal, and data. It consists of three components: a corrugated protective hose around the cables, holders that secure the hose by axis or allow it to move along, and a retraction system that pulls away excess hose as the robot enters. In this way, the pack follows the robot in a fixed, wide curve, without kinks at the wrist and without loops in the cell.

Four configuration variants

Not every robot requires a package across all axes. The robot division is putting together four variants:

  • Complete dress pack along axes 1 through 6, from the foot to the tool.
  • Upper arm, axes 3 through 6, if the cabling up to axis 3 is already correctly installed.
  • Basic, axes 1 through 3, for guidance from the foot to the upper arm.
  • Cobot package, a light package along the arm while the arm remains free.

Which configuration fits depends on the robot, the process, and what needs to go to the tool. The division works with protective hoses from Reiku and selects the parts per robot.

Configure online

In the dress pack configurator Wisman-techniek.nl features over 200 robot series from manufacturers including ABB, FANUC, KUKA, and Yaskawa. You select your robot, configure the package, and receive a bill of materials per axis. The robot division checks every configuration regarding the robot and tooling before a quotation is issued. There is a dedicated page for each robot brand and series containing manufacturer details and hose recommendations, for example for ABB, FANUC and KUKA.

Imported and assembled

Cables and hoses are fed into the workshop in Ruurlo. The package is delivered complete or as a separate replacement, and the division installs on location in the Netherlands and Belgium. Replacing an existing dress pack is also possible: the complete package or just the worn parts, such as the hose, a clamp, or the retraction system.

For integrators, machine builders, and end users

The division focuses on robot integrators, machine builders, and end users in the Netherlands and Belgium. Those who prefer to consult directly can call Wisman Techniek on +31 88 002 3500 or email verkoop@wisman-techniek.nl.

More information: wisman-techniek.nl/producten/dresspacks

FHI, Federatie van technologiebranches